|
Ilford "SPRITE" Camera, a must for your collection of memorabillia.
$35 |
Aston style filler cap, screws onto outside of filler neck. Does not seal on filler neck and must be used with seperate fuel cap.
$75 |
Locking fuel cap, to suit Aston filler cap.
$25 |
|
New Old Stock Sprite horn push, no longer available through AH Spares or Moss Motors.
$160 |
50th Anniversary Bugeye boot badge!
$40 |
50th Anniversary grille badge!
$40
SOLD OUT! |
|
Weber 45DCOE, fully serviced and will be jetted to suit your engine, on perfect used manifold (bead blasted and painted with clear enamel) and near new K&N air filter.
$700 |
Lucas 43D4 distributor, non-vacuum advance to suit tuned or performance engines, fully serviced and supplied with all new parts.
$300 |
Carpet kit, 16 pieces. Mk III Midget kit shown, but kits available to suit all models of Sprite and Midget.
$250 |
|
Hi-torque pre-engaged starter motor, re-manufactured and modified to suit Sprite or Midget. No wiring changes necessary. Will spin the engine much faster than your old Lucas starter motor, and preserve the flywheel ring gear by engaging before spinning!
$275 + GST |
Quality leather key fob with steel key ring and tag, choice of MG, Austin Healey or other badge.
$18 |
Nardi Gold 13" mahogany wheel, the top of the Nardi range, minor scratches to spokes, rim in excellent condition, fitted with new boss kit. These cost over $650 new.
$420 |
|
Nardi 14" mahogany wheel in near new condition, fitted with new boss kit. These cost over $600 new.
$395 |
Nardi 14" leather wheel, very rare, in as new condition, fitted with new boss kit. These cost over $600 new.
$420 |
Momo black leather wheel with red stitching, excellent condition, new boss kit and horn push.
SOLD for $395 |
|
Momo Super Indy steering wheel 13.5" diameter slight marking around rim which is easily sanded back and re-laquered, new boss kit and horn push.
$235 |
SAAS steering wheel, 13" diameter, leather in near new condition, new boss kit.
$240 |
Personal steering wheel, 13.5" diameter, near new condition with new boss kit.
$195 |
|
New Old Stock MG Midget horn push, no longer available through AH Spares or Moss Motors.
$150 |
Detroit Locker diff centre, the ultimate diff for competition use, fully checked and serviced.
$1500 |
 The Detroit Locker prior to assembly.
|
|
Limited edition Bugeye pencil study, one of only 150 prints, measures 20cm x 30cm.
$20 |
Fully reconditioned dashboard, repaired with fresh even coat of wrinkle finish.
from $120 on exchange |
Bugeye numbered print, 20cm x 28cm, mounted on heavy card and shrink-wrapped, ready for framing.
$40 |
|
Fully reconditioned windscreen wiper motor. All parts bead blasted, cad plated or repainted. New brushes and self-park lead.
$180 on exchange |
Big bore extractors, new, to suit all size engines but particularly 1275.
$185 |
Limited Slip Diff
New, Australian made, clutch style limited slip diff
$1350 less trade in if applicable |
|
 LSD installed
|
Braided steel oil cooler hoses, to suit Sprite, Midget or MGB.
$220 per pair |
Pertronix Ignitor positive earth electronic ignition kit, to suit Lucas 43D4 or 45D4 distributor.
$220 |
|
Stop your (car's) rear end moving around with this Panhard Rod kit - provides positive lateral axle location.
$295 |
Soft-top frame bag (only) to suit Mk II Sprite or Mk I MG Midget. An exact replica of the original, in the same unpadded vinyl.
$75 |
Soft-top frame bag (only) to suit Mk III or IIIA Sprite, and Mk II MG Midget. An exact copy of the original, in the same "Hardura" material.
$105 |
|
Sidescreen bag, made to original specifications with a pocket for each sidescreen (sidescreen not included)
$80 |
Tool kit bag - strong doubled vinyl made to original pattern
$60 (tools not included) |
Roller clutch release bearing in cast iron housing.
$140 |
|
Lucas PL700 "Tripod" headlights, with bulbs.
$300 per pair |
Minimise your oil leaks with this reconditioned PCV valve - bead-blasted body, new diaphragm, re-plated cap and spring
$75 |
NEW combination oil pressure & water temperature (fahrenheit) gauge with temperature sensor and line.
$215 |
|
Battery bracket kit, choice of one bracket (948cc on the left, 1098cc centre, 1275cc right) plus two J-bolts and two wing nuts
$32 |
Bugeye chassis chart, essential for restoration or nice reference material
$10 |
Bugeye bonnet prop kit, consisting of two new brackets, a new rod and clip
$45 |
|
Minator wheel, 13" x 5", with Sprite wheel cap sticker and chrome locating nuts.
$235 each |
Minator wheel, 13" x 5", with Sprite wheel cap sticker and chrome locating nuts.
$235 each |
Pedal pivot repair kit - two bronze bushes and a new pivot bolt
$32 |
|
Seat base - exact reproduction
$220 |
Seat base - exact reproduction
$220 |
Seat base - exact reproduction
$220 |
|
Bugeye see-through print, as commissioned for The Motor magazine
$10 |
Spare wheel hold-down clamp - Rostyle, steel wheel, knurled (used, rare) or wire wheel
$45 |
Weber performance inlet manifold with fitting kit
$195 |
|
Wire wheel ad - genuine leaflet to advertise the availability of factory wire wheels
$10 |
Genuine "It's Only a Sprite" decal by Ed "Big Daddy" Roth
$10 |
Demister kit - bead blasted and painted vents and elbows, new flex tubing, to suit all model Sprite and Midget
$100 |
|
Twin 1 1/4" SUs, fully serviced on bead blasted manifold, with new heat shield and Cad plated linkages
$650 |
Drilled and slotted Brembo brake discs, available for both wire and steel wheels.The ultimate performance brake disc.
$385 |
Set of new competition 1360cc (73mm) pistons with new rings and pins. Now you can use that worn out 1330cc block without the need to offset bore it. We have used these in race engines up to 13:1 compression.
$450 |
|
Bugeye windscreen washer bottle bracket, to suit the larger 2 pint bottle. Brand new and in primer, waiting for a coat of gloss black paint.
$35 |
Bugeye body dimension chart, on heavy card suitable for framing, essential for restoration or nice reference material
$10 |
Tired of oil leaks from the old cartridge style oil filters? Time you changed to a more modern screw-on filter. This is a brand new housing, supplied with gasket and two oil filters.
$95 |
|
|
|
|
